PDA

View Full Version : Repost: Problem building from command line.



NewsArchive
12-07-2001, 01:00 AM
Hello all,

I am trying to build from command line and I am getting this error message:

** Error -2147221528: Error opening the project file. The project file
is either open in the IDE or it is read-only.
> IsmAuto.Project.IProject_OpenError: -2147221528

My project is not open and is not read only. What is going on? Can someone
help? Any suggestions are welcome.

Thanks a lot,
Pavel Volkov

NewsArchive
12-07-2001, 01:00 AM
Usually we get a very specific error message when opening a read only
project so this is usually an accurate error message.

What does your command line look like? Maybe there is something in that
that may yield some useful information.

Regards
David Thornley

"Pavel Volkov" <pvolkov@lhsl.com> wrote in message
news:3c10d863@news.installshield.com...
> Hello all,
>
> I am trying to build from command line and I am getting this error
message:
>
> ** Error -2147221528: Error opening the project file. The project file
> is either open in the IDE or it is read-only.
> > IsmAuto.Project.IProject_OpenError: -2147221528
>
> My project is not open and is not read only. What is going on? Can someone
> help? Any suggestions are welcome.
>
> Thanks a lot,
> Pavel Volkov
>
>
>
>

NewsArchive
12-07-2001, 01:00 AM
Hi David,

thanks a lot for your reply, I don't think the problem in the command line I
am passing though. When I execute the line:
IsCmdBld.exe -p project.ism

I am getting the same error message. I've upgraded from 2.03 to Developer
7.01, note that I was able to build before the upgrade, so I guess something
went wrong during the upgrade.
Can you think of anything? Please help, it is a hazard for our build
process.

Thanks a lot,
Pavel Volkov

"David Thornley" <davidt@installshield.com> wrote in message
news:3c110482$1@news.installshield.com...
> Usually we get a very specific error message when opening a read only
> project so this is usually an accurate error message.
>
> What does your command line look like? Maybe there is something in that
> that may yield some useful information.
>
> Regards
> David Thornley
>
> "Pavel Volkov" <pvolkov@lhsl.com> wrote in message
> news:3c10d863@news.installshield.com...
> > Hello all,
> >
> > I am trying to build from command line and I am getting this error
> message:
> >
> > ** Error -2147221528: Error opening the project file. The project
file
> > is either open in the IDE or it is read-only.
> > > IsmAuto.Project.IProject_OpenError: -2147221528
> >
> > My project is not open and is not read only. What is going on? Can
someone
> > help? Any suggestions are welcome.
> >
> > Thanks a lot,
> > Pavel Volkov
> >
> >
> >
> >
>
>

NewsArchive
12-07-2001, 01:00 AM
Can you try specifying an absolute path to the ISM file. I know we had
issues similar to this in the Automation layer and that solved the problem.
If so this is a bug, so if you could let me know if this helps I will create
a Work Order for you.

"Pavel Volkov" <pvolkov@lhsl.com> wrote in message
news:3c111b84$1@news.installshield.com...
> Hi David,
>
> thanks a lot for your reply, I don't think the problem in the command line
I
> am passing though. When I execute the line:
> IsCmdBld.exe -p project.ism
>
> I am getting the same error message. I've upgraded from 2.03 to Developer
> 7.01, note that I was able to build before the upgrade, so I guess
something
> went wrong during the upgrade.
> Can you think of anything? Please help, it is a hazard for our build
> process.
>
> Thanks a lot,
> Pavel Volkov
>
> "David Thornley" <davidt@installshield.com> wrote in message
> news:3c110482$1@news.installshield.com...
> > Usually we get a very specific error message when opening a read only
> > project so this is usually an accurate error message.
> >
> > What does your command line look like? Maybe there is something in that
> > that may yield some useful information.
> >
> > Regards
> > David Thornley
> >
> > "Pavel Volkov" <pvolkov@lhsl.com> wrote in message
> > news:3c10d863@news.installshield.com...
> > > Hello all,
> > >
> > > I am trying to build from command line and I am getting this error
> > message:
> > >
> > > ** Error -2147221528: Error opening the project file. The project
> file
> > > is either open in the IDE or it is read-only.
> > > > IsmAuto.Project.IProject_OpenError: -2147221528
> > >
> > > My project is not open and is not read only. What is going on? Can
> someone
> > > help? Any suggestions are welcome.
> > >
> > > Thanks a lot,
> > > Pavel Volkov
> > >
> > >
> > >
> > >
> >
> >
>
>

NewsArchive
12-07-2001, 01:00 AM
No, it still doesn't work, any other possibilities?

Thanks a lot,
Pavel Volkov

"David Thornley" <davidt@installshield.com> wrote in message
news:3c112339$1@news.installshield.com...
> Can you try specifying an absolute path to the ISM file. I know we had
> issues similar to this in the Automation layer and that solved the
problem.
> If so this is a bug, so if you could let me know if this helps I will
create
> a Work Order for you.
>
> "Pavel Volkov" <pvolkov@lhsl.com> wrote in message
> news:3c111b84$1@news.installshield.com...
> > Hi David,
> >
> > thanks a lot for your reply, I don't think the problem in the command
line
> I
> > am passing though. When I execute the line:
> > IsCmdBld.exe -p project.ism
> >
> > I am getting the same error message. I've upgraded from 2.03 to
Developer
> > 7.01, note that I was able to build before the upgrade, so I guess
> something
> > went wrong during the upgrade.
> > Can you think of anything? Please help, it is a hazard for our build
> > process.
> >
> > Thanks a lot,
> > Pavel Volkov
> >
> > "David Thornley" <davidt@installshield.com> wrote in message
> > news:3c110482$1@news.installshield.com...
> > > Usually we get a very specific error message when opening a read only
> > > project so this is usually an accurate error message.
> > >
> > > What does your command line look like? Maybe there is something in
that
> > > that may yield some useful information.
> > >
> > > Regards
> > > David Thornley
> > >
> > > "Pavel Volkov" <pvolkov@lhsl.com> wrote in message
> > > news:3c10d863@news.installshield.com...
> > > > Hello all,
> > > >
> > > > I am trying to build from command line and I am getting this error
> > > message:
> > > >
> > > > ** Error -2147221528: Error opening the project file. The
project
> > file
> > > > is either open in the IDE or it is read-only.
> > > > > IsmAuto.Project.IProject_OpenError: -2147221528
> > > >
> > > > My project is not open and is not read only. What is going on? Can
> > someone
> > > > help? Any suggestions are welcome.
> > > >
> > > > Thanks a lot,
> > > > Pavel Volkov
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>