PDA

View Full Version : Building project causes InstallShield to crash



pseamans
10-10-2013, 02:46 PM
I have a project that I created originally in InstallShield 2012Spring. I am able to build and have been distributing the resulting installs. I have converted the project to InstallShield 2013 SP1 without error but when I try to build the project InstallShield crashes. I receive the following error. I've tried going back to 2012Spring on the pre-upgraded project file and it compiles just fine. Convert again and it will crash the development environment. Any help/suggestions appreciated.

10249


InstallShield needs to close.
An error has occurred that InstallShield could not recover from.
We have created an error report that you can view and send to us. This report is read by an automated process and no response is sent to you. If you have a project open you may be able to save the changes.

You can view the technical details of this error.

Restart InstallShield
Save changes to project

The technical details:
Exception ACCESS_VIOLATION (0xc0000005)
at address 0x62ed1840 trying to read address 0x00000008.

File : C:\Program Files\InstallShield\2013\System\isdev.exe
Version : 20.0.0.496
Exception : c0000005
Address : 62ed1840
Access Type : read
Access Address : 00000008

Registers : EAX=0012c6a0 CS=001b EIP=62ed1840 EFLGS=00010206
: EBX=00000000 SS=0023 ESP=0012c564 EBP=0012c5b4
: ECX=62e54834 DS=0023 ESI=00000000 FS=003b
: EDX=006f6da8 ES=0023 EDI=0012c67c GS=0000

Stack Trace : 1462f1db 1462f7bd 71656c2f 14802c86
: 107657a0 00000000 00000000 00000000
: 00000000 00000000 00000000 00000000
: 00000000 00000000 00000000 00000000
: 00000000 00000000 00000000 00000000
: 00000000 00000000 00000000 00000000
: 00000000 00000000 00000000 00000000
: 00000000 00000000 00000000 00000000