PDA

View Full Version : Language and Bitmaps



NewsArchive
07-30-1997, 12:00 AM
Hi there,

I'm using Delphi 2.0 c/s with install shield version 1.0.

- Is there a language module (Dutch) for install shield ?

- What is the size of the Welcom Bitmap (in pixels) ?

- Can i make the Logo Bitmap in the main window transparent ?


Thanks in advance,

Frank Bombay,
bombay@transdata.nl

NewsArchive
08-16-1997, 12:00 AM
There is a Dutch language pack included in InstallShield Express 2

The Welcome Bitmap that ships with Express is 443x269 (in pixels)

Express does not yet support transparent bitmaps.

--
Best of luck,
Tim Woomert
InstallShield Software Corporation

Frank Bombay <algemeen@transdata.nl> wrote in article
<01bc9cca$73eefbe0$f73e4fc1@frank>...
> Hi there,
>
> I'm using Delphi 2.0 c/s with install shield version 1.0.
>
> - Is there a language module (Dutch) for install shield ?
>
> - What is the size of the Welcom Bitmap (in pixels) ?
>
> - Can i make the Logo Bitmap in the main window transparent ?
>
>
> Thanks in advance,
>
> Frank Bombay,
> bombay@transdata.nl
>

NewsArchive
06-28-1999, 12:00 AM
I'd like to have the two kinds of options. I want because when I run an
installation inside another, I have to inform the installation, what
language it will run. But I also want the user to choice the language, even
if the user run in separate of the main install.

Robert M Dickau wrote in message <377539b4.0@news.installshield.com>...
>You can suppress the Choose Setup Language dialog box when you run the
Media
>Build Wizard: in the Build Type panel, click the Advanced button; click the
>Setup tab; and remove the check from the "Enable language dialog" box.
>
>Jones wrote in message <377396f4.0@news.installshield.com>...
>>How do i execute installation by the command line, disabling the language
>>choice. Is there any setting, going through the command line for the
>>installation that disables this possibility??
>
>
>Robert M Dickau
>InstallShield Software Corp
>
>

NewsArchive
09-16-1999, 12:00 AM
I found the error. I defined some wrong conditions for the Template Summary
in the ProductProperties this results to this misleading error message. When
I remove the complete condition the MSI works.

Thanks,
Boris Düdder


David Thornley schrieb in Nachricht <37e12bf1.0@news.installshield.com>...
>This is an error that I am not familiar with. It sounds though like it is
>coming from the Setup.exe. Does this happen with all packages that you
>create or just packages that you ported over from 1.0.
>
>Were you working with the beta version of ISWI International before
>upgrading to 1.01?
>
>--
>David Thornley
>Lead Developer Support Engineer
>InstallShield Software Corporation
>http://www.installshield.com
>
>
>
>Boris Düdder wrote in message <37e12a81.0@news.installshield.com>...
>>Hi,
>>
>>I updated my system to ISWI 1.01.0622. When I execute my installation I
get
>>the error that language (in this case english)
>>is not supported by my system (german).
>>
>>Do anybody know a solution for this problem?
>>
>>Thanks,
>>Boris Düdder
>>Heinen Düdde Geosysteme
>>
>>
>
>

NewsArchive
05-26-2000, 12:00 AM
Hi Stefan,

I think you don&#180;t know what I mean, I don&#180;t want, that you must choose a
language at the beginning.
I want that the programm choose the language automatically. So I have to
examine what systemlanguage he has, and so, I must address the dialoges in
english or in german.

NewsArchive
05-26-2000, 12:00 AM
see my reply in other newsgroup.

--
Stefan Krueger - Independent Setup Consultant
<<reply-to address is invalid to avoid spam>>

Visit InstallSite at http://www.installsite.org to download
free code samples, tips, tools and more...
For information about individual support and consulting services
please send a blank mail to the autoresponder at info@installsite.org

Stefan Krueger and the InstallSite.org web site are not affiliated
with InstallShield Software Corporation.

Guest schrieb in im Newsbeitrag:
392e2a4c.0@208.30.171.38...
> Hi Stefan,
>
> I think you don&#180;t know what I mean, I don&#180;t want, that you must choose a
> language at the beginning.
> I want that the programm choose the language automatically. So I have to
> examine what systemlanguage he has, and so, I must address the dialoges in
> english or in german.
>
>
>
>

NewsArchive
05-26-2000, 12:00 AM
Hi Stefan,

I think you don&#180;t know what I mean, I don&#180;t want, that you must choose a
language at the beginning.
I want that the programm choose the language automatically. So I have to
examine what systemlanguage he has, and so, I must address the dialoges in
english or in german.

NewsArchive
05-26-2000, 12:00 AM
In media build wizard, disable the langauge selection dialog (you must click
the Advanced button on one of the dialogs to see this option). IS will then
automatically start in the language of the system locale (if that language
exists in your setup).

--
Stefan Krueger - Independent Setup Consultant
<<reply-to address is invalid to avoid spam>>

Visit InstallSite at http://www.installsite.org to download
free code samples, tips, tools and more...
For information about individual support and consulting services
please send a blank mail to the autoresponder at info@installsite.org

Stefan Krueger and the InstallSite.org web site are not affiliated
with InstallShield Software Corporation.

Guest schrieb in im Newsbeitrag:
392e2a83.0@208.30.171.38...
> Hi Stefan,
>
> I think you don&#180;t know what I mean, I don&#180;t want, that you must choose a
> language at the beginning.
> I want that the programm choose the language automatically. So I have to
> examine what systemlanguage he has, and so, I must address the dialoges in
> english or in german.
>
>
>
>

NewsArchive
05-26-2000, 12:00 AM
Hi Stefan,

that was the soloution of my Problem,
thank you, for your help

NewsArchive
10-13-2000, 12:00 AM
Thx . *gg*

"Mark at IS" <support@installshield.com> schrieb im Newsbeitrag
news:39e70c33$1@12.41.20.38...
> "Marcel Schmid" <mschmid@softcrew.com> wrote in message
> news:39e6d977@12.41.20.38...
>
> > I have add a Language in the Pojekt Settings... But how can i remove a
> > Language? Can some one give me an input? thx *g*
>
> See InstallShield Knowledge Base article Q102764,
> "HOWTO: Removing a Language From Your Multi-Lingual Installation," at
>
http://support.installshield.com/kb/default.asp?action=Display&documents_id=
> 102764.
>
> --
> Mark
> InstallShield Software Corporation
>
>

NewsArchive
10-13-2000, 12:00 AM
--------------B72AB1140BF02F4705AB2A42
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Will this be added to a future version of IS so that we could just hightlight a
language and delete it rather than doing all this by hand?

Thanks,

- Dan :D

Mark at IS wrote:

> "Marcel Schmid" <mschmid@softcrew.com> wrote in message
> news:39e6d977@12.41.20.38...
>
> > I have add a Language in the Pojekt Settings... But how can i remove a
> > Language? Can some one give me an input? thx *g*
>
> See InstallShield Knowledge Base article Q102764,
> "HOWTO: Removing a Language From Your Multi-Lingual Installation," at
> http://support.installshield.com/kb/default.asp?action=Display&documents_id=
> 102764.
>
> --
> Mark
> InstallShield Software Corporation

--------------B72AB1140BF02F4705AB2A42
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit

<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
Will this be added to a future version of IS so that we could just hightlight
a language and delete it rather than doing all this by hand?
<p>Thanks,
<p>-&nbsp; Dan&nbsp; :D
<p>Mark at IS wrote:
<blockquote TYPE=CITE>"Marcel Schmid" &lt;mschmid@softcrew.com> wrote in
message
<br><a href="news:39e6d977@12.41.20.38">news:39e6d977@12.41.20.38</a>...
<p>> I have add a Language in the Pojekt Settings... But how can i remove
a
<br>> Language? Can some one give me an input? thx *g*
<p>See InstallShield Knowledge Base article Q102764,
<br>"HOWTO: Removing a Language From Your Multi-Lingual Installation,"
at
<br><a href="http://support.installshield.com/kb/default.asp?action=Display&documents_id=">http://support.installshield.com/kb/default.asp?action=Display&amp;documents_id=</a>
<br>102764.
<p>--
<br>Mark
<br>InstallShield Software Corporation</blockquote>
</html>

--------------B72AB1140BF02F4705AB2A42--

NewsArchive
10-16-2000, 12:00 AM
"Dan Dorton" <"DDorton"@ NoSpam metastorm.com> wrote in message
news:39e787b4$1@12.41.20.38...

>Will this be added to a future version of IS so that
>we could just hightlight a language and delete it
>rather than doing all this by hand?

I haven't heard. You can request feature changes by posting to
installshield.is6.wishlist (to which I've crossposted this reply) or
emailing wish@installshield.com.

--
Mark
InstallShield Software Corporation

>Mark at IS wrote:

>>"Marcel Schmid" <mschmid@softcrew.com> wrote in message
news:39e6d977@12.41.20.38...

>>> I have add a Language in the Pojekt Settings... But how can i remove a
>>> Language? Can some one give me an input? thx *g*
>
>>See InstallShield Knowledge Base article Q102764,
>>"HOWTO: Removing a Language From Your Multi-Lingual Installation," at
>>http://support.installshield.com/kb/default.asp?action=Display&documents_i
d=102764.
>>--
>>Mark
>>InstallShield Software Corporation

NewsArchive
10-16-2000, 12:00 AM
"Dan Dorton" <"DDorton"@ NoSpam metastorm.com> wrote in message
news:39e787b4$1@12.41.20.38...

>Will this be added to a future version of IS so that
>we could just hightlight a language and delete it
>rather than doing all this by hand?

I haven't heard. You can request feature changes by posting to
installshield.is6.wishlist (to which I've crossposted this reply) or
emailing wish@installshield.com.

--
Mark
InstallShield Software Corporation

>Mark at IS wrote:

>>"Marcel Schmid" <mschmid@softcrew.com> wrote in message
news:39e6d977@12.41.20.38...

>>> I have add a Language in the Pojekt Settings... But how can i remove a
>>> Language? Can some one give me an input? thx *g*
>
>>See InstallShield Knowledge Base article Q102764,
>>"HOWTO: Removing a Language From Your Multi-Lingual Installation," at
>>http://support.installshield.com/kb/default.asp?action=Display&documents_i
d=102764.
>>--
>>Mark
>>InstallShield Software Corporation

NewsArchive
09-05-2001, 12:00 AM
Hi Stefan.

Danke für die Info.

Gruss
Josef

"Stefan Krueger" <nwsgrp@installsite.org> schrieb im Newsbeitrag
news:3b962650@news.installshield.com...
> AFAIK a German edition of ISD7 8with localized IDE) is under
> development.
>
> --
> Stefan Krueger - Independent Setup Consultant
>
> InstallSite - code samples, tips, tools, bug lists, and more
> http://www.installsite.org http://www.installsite.de (GERMAN)
> Support and consulting http://www.installsite.org/krueger
>
> Stefan Krueger and the InstallSite web site are not affiliated
> with InstallShield Software Corporation.
>
> "Josef Albrecht" <josef.albrecht@rst.de> schrieb im Newsbeitrag
> news:3b96127c@news.installshield.com...
> > Is IS going to release a german version?
> >
> > Regards
> > Joe
> >
> >
> >
>